|2307S: GWR FITTED WAGON BUFFERS WITH RIBS (SPRUNG)(4)|
Each buffer consists of a cast white metal body - which is ready bored to approximately 0.5mm - a turned steel head with a stepped shank - approximately 0.4 mm and 0.9 mm - and a 0.9 mm diameter coil spring. The outer end of the bore in the buffer body must be opened to 1.0 mm (easily accomplished by hand) to accept the buffer head and spring before the buffer is assembled. There is no brass bush to glue on the rear face. Pack of 4.
(OO Gauge / 4mm Scale)